Posted on

Speaking with Bob Long on the Benefits of Ozone

Bob Long interview on ozone generation

Bob long is our technical expert, and he recently had a conversation on the benefits and power of ozone and how best to use it.

Dispelling some of the myths surrounding ozone and explaining how and why it could be the answer to helping pubs, clubs, bars and restaurants keep their staff and customers safe.


Posted on

Safe and Effective Use of Ozone as Air and Surface Disinfectant in the Conjuncture of Covid-19

Technical Note

Elena Grignani 1, Antonella Mansi 2, Renato Cabella 2, Paola Castellano 2, Angelo Tirabasso 2, Renata Sisto 2, Mariangela Spagnoli 2, Giovanni Fabrizi 2, Francesco Frigerio 1
and Giovanna Tranfo 2,*

ICS Maugeri Spa SB, Environmental Research Centre, Via Atene, 9, 35010 Perarolo di Vigonza (PD), Italy; (E.G.); (F.F.)
INAIL (Italian Workers’ Compensation Authority), Department of Occupational and Environmental Medicine, Epidemiology and Hygiene, Via di Fontana Candida, 1, 00078 Monte Porzio Catone (RM), Italy; (A.M.); (R.C.); (P.C.); (A.T.); (R.S.); (M.S.); (G.F.)

Abstract: The present paper extrapolates quantitative data for ozone virucidal activity on the basis of the available scientific literature data for a safe and effective use of ozone in the appropriate cases and to explore the safety measures developed under the stimulus of the current emergency situation. Ozone is a powerful oxidant reacting with organic molecules, and therefore has bactericidal, virucidal, and fungicidal actions. At the same time, it is a toxic substance, having adverse effects on health and safety. Its use is being proposed for the disinfection of workplaces’ and public places’ atmosphere, and for disposable masks and personal protective equipment disinfection for reuse, with particular reference to the COVID-19 pandemic outbreak. Ozone can be generated in situ by means of small, compact ozone generators, using dried ambient air as a precursor. It should be injected into the room that is to be disinfected until the desired ozone concentration is reached; after the time needed for the disinfection, its concentrations must be reduced to the levels required for the workers’ safety. The optimal use of ozone is for air and surface disinfection without human presence, using a concentration that is effective for the destruction of viruses, but not high enough to deteriorate materials.

Keywords: SARS-CoV-2; ozone generators; sanification; disinfection; virucidal efficacy; occupational exposure; personal protective equipment

1. Introduction

The Report ISS Covid-19 n. 25/2020 [1] issued on May 2020 by the Italian Institute of Health (ISS), reports recommendations on the sanification of non-healthcare settings during the COVID-19 emergency. In this document, the term “sanification” is intended as the process of cleaning and/or disinfecting and maintaining good air quality, taking into account scientific evidence of COVID-19 virus persistence on different surfaces, and the efficacy of cleaning and disinfection products for indoor environments. Ozone is evaluated, among other disinfectants, on the basis of the available literature and of the statements of internationally recognized organizations. European Chemical Agency (ECHA), Centers for Disease Control and Prevention (CDC), Food and Drug Administration (FDA), United States—Environmental Protection Agency (US-EPA) and the International Ozone Association ( confirm the effectiveness of ozone for the inactivation of many viruses, although without being aware of specific research on SARS-CoV-2.

Ozone, an allotropic form of oxygen, is an inorganic gas (CAS n. 10028-15-6) constituted by three oxygen atoms (O3) arranged in a bent structure, where the distance among oxygen atoms is 1.26 Å. It easily decomposes into oxygen (O2) and one single, very reactive oxygen atom. Ozone is present in nature and its concentration in the atmosphere is approximately 0.04 parts per million (ppm: 1 ppm

~ 2 mg/m3). It is also produced by ultraviolet irradiation of oxygen or other precursors such as volatile organic compounds and nitrogen oxides present in the atmosphere. About 90% of the atmospheric ozone is located in the stratosphere, and therefore called stratospheric ozone. The solubility of ozone in water is 49.0 mL/100 mL (at 0 ◦C), tenfold than oxygen, thus causing an immediate reaction with any biomolecule in biological fluids. Its density (2.14 kg/m3) is higher than that of air, letting it concentrate close to the ground in indoor environments.

Ozone is well known for its protective role in the earth’s ecological environment. Being a powerful oxidant, it is able to react with organic molecules containing double or triple bonds. This is the origin of its bactericidal, virucidal, and fungicidal actions, which are used in water treatment, odor control and medicinal applications [2].

The inhibitory and lethal effects of ozone on pathogenic microorganisms have been observed since the 19th century, and the most cited explanation of these effects is based on the disruption of their envelopes through peroxidation of phospholipids and interaction with proteins [3]

The ozone virucidal effect has been also studied by Roy et al. in 1981 [4], showing that after 30 s of exposure, 99% of the viruses were inactivated: their envelope proteins had been damaged, causing possible failure of attachment to normal cells, and their single-stranded RNA was broken.

Viruses are small particles built of macromolecules; unlike bacteria, they need a host cell to multiply, and being unable to repair oxidative damage, they are more susceptible to oxidative action than prokaryotic or eukaryotic organisms [5].

Ozone interacts with viruses in which a lipoprotein envelope is present, by spreading through the protein coat into the nucleic acid core, damaging their DNA or RNA [6–8]. Most studies on ozone’s virucidal effects have focused on ozone’s ability to break apart lipid molecules with multiple bonds. In fact, if the envelope of the virus is fragmented, its DNA or RNA core cannot survive. The enveloped viruses are usually more sensitive to physical–chemical challenges than naked ones.

Naked viruses only have a nucleocapsid, which is a protein capsid that covers the nucleic acid core (DNA or RNA). Even if ozone’s effect on unsaturated lipids is one of its best-documented biochemical actions, it can interact with proteins, carbohydrates, and nucleic acids [7]. Due to its high reactivity, the toxic effects of ozone reaction products should also be considered.

Manufacturers and sellers of ozone devices use a variety of terms that suggest that ozone is a “healthy” kind of oxygen, but ozone is a toxic gas with very different properties from oxygen, and concentrations that are safe to breathe are unlikely to be effective in controlling indoor air pollution [8].

A comprehensive evaluation of ozone human health effects was recently performed by the US EPA, as part of the “Integrated Science Assessment for Ozone and Related Photochemical Oxidants” [9]. According to this report, recent studies support and expand upon the strong body of evidence that short-term ozone exposure causes respiratory effects. The strongest evidence comes from controlled human exposure studies demonstrating ozone-induced decreases in lung function and inflammation in healthy, exercising adults at concentrations as low as 60 ppb after 6.6 h of exposure. In addition, epidemiologic studies continue to provide strong evidence that ozone is associated with respiratory effects, including asthma and chronic obstructive pulmonary disease exacerbations. The available evidence was inadequate to determine whether there was a causal relationship between exposure to ambient ozone and cancer.

Currently, in Italy, ozone can be used exclusively as a sanitizer. It is presently being reviewed by the European Environmental Agency and/or Switzerland for use as a biocide, in disinfection, food and animal’s feeds, drinking water, and as a preservative for liquid systems, under the Biocidal Products Regulation (BPR) of ECHA.

Gases 2021, 1 21

The objective of this study was to conduct a literature review on the ozone virucidal efficacy in order to individuate the optimal conditions (concentration, contact time, microclimate) for its possible use as disinfectant for indoor environments and Personal Protective Equipment (PPE), with particular reference to SARS-CoV-2. In addition to this, some critical aspects that currently prevent the use of this gas as a disinfectant, including safety risks and the lack of Indicative Occupational Exposure Limit Values (IOELVs) at European Union level, were further explored.

2. Methods

2.1. Literature Search

A literature review, started on June and ended November 2020, was carried out using PubMed, Scopus and Google Scholar databases. A first search was conducted to identify publications dealing with the ozone virucidal activity under different experimental conditions, as gas concentration, contact time and microclimatic parameters. Articles were identified using the following keyword combinations: (“ozone” OR “ozone generator” OR “gaseous ozone”) AND (“disinfectant” OR “disinfection” OR

“sanitation” OR “efficacy” OR “treatment” OR “activity”) AND (“coronavirus” OR “COVID-19” OR “SARS-CoV-2” OR “SARS-CoV-1” OR “viruses”).

In the same databases, another search was performed in order to find articles regarding the use of ozone as a disinfectant for the safe reuse of PPE and the possible damage caused to materials. For this purpose, the following search string was used: (“PPE” OR “Personal Protective Equipment” OR “N95 Mask” OR “KN95 Mask” OR “Filtering Face Piece” OR “FFP” OR “gowns” OR “gloves” OR “glasses” OR “shields” OR “goggles”) OR (“rubber” OR “polyethylene” OR “polypropylene” OR

“cotton fabric”).
Publications titles and abstracts were reviewed and only those that met the criteria described

above were eligible for the inclusion. Documents on the use of ozone in aqueous solution or those about ozone therapy for patients were not taken in consideration. Only articles written in English were included.

2.2. Metrics for Airborne Microorganisms Inactivation

By examining the scientific literature about ozone virucidal efficiency, the ozone concentration values that were able to inactivate viral microorganisms at normal ambient temperature and relative humidity, in a certain exposure time, were extracted.

Normalized infectious ratios (NIRs) were calculated by dividing the mean sample plaque-forming unit (PFU)/mL by the mean control PFU/ml and the mean control genomes/ml by mean sample genomes/ml. Results were multiplied together. NIRs were calculated both for ozone and for the reference (air) conditions.

Lastly, relative infectious ratios (RIRs) were obtained by dividing each ozone-NIR with the corresponding median air-NIR.

RIR = NIR O3/median [NIR air] (1) The RIRs represent the effect of ozone only, since data were corrected for the effect of relative

humidity (RH) and aerosol aging without ozone [10].

3. Results

3.1. Ozone Virucidal Efficacy

A total of 109 documents were retrieved in databases using all the above-mentioned keywords and search strings, but only 17 papers were eligible for inclusion. The review of the existing scientific literature demonstrates that ozone is an extremely rapid and potent virucidal; however, exact gaseous

Gases 2021, 1 22

ozone dosages are limited to only a few studies, as virucidal action of ozone happens in seconds or fractions of seconds and this makes the measurement of viral inactivation technically challenging [3]. The data available in the literature do not cover all virus types. In some studies, the virucidal activity of ozone was tested on pathogenic viruses of particular clinical interest such as Poliovirus,

Norovirus, Herpes Simplex Virus and Influenza virus [4–6,10]; in others, instead, the bacteriophages were used in place of airborne human pathogenic viruses [8].

Hudson [5] developed a prototype ozone generator (Viroforce 1000) that contains eight corona discharge units, and that subsequently removes ozone by a built-in catalytic converter. In this study, the maximum anti-viral efficacy was obtained at a concentration of 25 ppm of ozone for 15 min, followed by a short period of >90% relative humidity. All the 12 viruses tested were inactivated by at least three orders of magnitude, both in laboratory and in simulated field trials, on different hard and porous surfaces, and in the presence of biological fluids. Viral activity was tested through cellular culture.

Inactivation of herpes simplex virus (HSV) by ozone was studied by Petry et al. [7], generating ozone by a commercial air purifier (Brizzamar, Ronda Alta, RS, Brazil). The ozone concentration in the environment was monitored through the EcoSensor Model OS-4 (Ozone Switch TM, Newark, CA, USA). With an ozone exposure of 1–3 h at concentrations between 0.02 and 0.05 ppm, a 68–90% reduction in viral activity tested through cellular culture was obtained.

Dennis [11] tested five commercial ozone generators used to reach the target ozone concentration in a box for DPI regeneration. The antiviral efficacy was guaranteed at 10–20 ppm for 10 min, based on the results of other papers.

Tseng and Chihshan [12] studied the inactivation of four different viruses, representative of ssDNA, ssRNA, dsDNA, and enveloped dsRNA categories, using an ozone generator with pure oxygen at 3 L/min (OZ1PCS-V/SW, Ozotech Inc., Yreka, CA, USA). Airborne Ozone concentrations were measured by an ozone analyzer (model 401, Advanced Pollution Instruments, San Diego, CA, USA), with a detection limit of 1.0 ppb. Ozone levels of 0.6–1.2 ppm for 20–112 min time guaranteed 90% and 99% of inactivation, respectively. For all the tested viruses, the ozone concentration required for the same inactivation level was lower at 85% RH than at 55%.

Zhang et al. [13] demonstrated that ozone in aqueous solution is able to inactivate SARS-CoV-1, the etiologic agent responsible for the Severe Acute Respiratory Syndrome (SARS) spread in 2003, which has a very similar structure to the SARS-CoV-2 virus, causing the current COVID-19 pandemic. Afterwards, Hudson et al. [5] tested the virucidal action of ozone on murine coronavirus (MCV), a species of coronavirus which infects mice, commonly used as a surrogate for SARS-CoV-1.

As SARS-CoV-2 is an enveloped virus, particularly sensitive to oxidant action, the scientific evidence suggested that ozone would effectively inactivate this new coronavirus too.

Moreover, some studies [8,12,14] showed that the important factor for inactivation of viruses and other microorganisms is the total ozone dose, which can be calculated as the product of exposure time and concentration. In fact, low concentrations of ozone for longer exposure times produce the same results as shorter exposures at high concentrations.

Dubuis ME et al. [10] tested the efficacy of ozone and RH combinations for the inactivation of different airborne viruses. Four phages (φX174, PR772, MS2 and φ6) and one eukaryotic virus (murine norovirus MNV-1) were exposed to low ozone concentrations (1.23 ppm for phages and 0.23 ppm for MNV-1) at different levels of RH, for time intervals ranging from 10 to 70 min. A two orders of magnitude inactivation was achieved for φX174, MS2 and MNV-1 with an ozone exposure of 40 min at 85% RH. For PR772 and φ6, exposure to the reference condition at 20% RH for 10 min gave the same results. In according to previous studies [15], these results suggest that ozone, even when used at a low concentration, is a powerful disinfectant for airborne viruses and other microorganisms if combined with a high RH level. It is well known that ozone is an oxidizing agent in aqueous solutions, and when in the gas phase, reacting with water, it generates free radicals that increase its disinfection power.

Gases 2021, 1 23

Tseng and Li [8] also observed that the phages inactivation increased when high 85%RH was used and further studies demonstrated that ozone under high RH conditions leads to the formation of more free radicals than in dry air [14,16].

In another study, Blanchard et al. [17] showed that a concentration of 20 ppm of ozone is able to inactivate some enveloped respiratory viruses (influenza A virus and respiratory syncytial virus) that are very similar in form and function to SARS-CoV-2. The authors performed a series of experiments under different relative humidity conditions, demonstrating that, at 50–70% RH, the ozone treatment was highly effective (99.99% reduction in viral infectivity) because of a greater production of highly reactive hydroxyl radicals. Therefore, they conclude that the humidity is an important parameter to evaluate, because, under rather dry environmental conditions, the disinfection procedure could require considerably longer exposure times.

More recently, Yano et al. [18] reported the first results about the inactivation of SARS-CoV-2 using ozone. In this study, the viral load of SARS-CoV-2 (JPN/TY/WK-521 strain) was determined by using the plaque assay on confluent layers of VeroE6/TMPRSS2 cells in culture plates. Cell monolayers were allowed to dry before exposure to ozone at concentrations of 1.0 and 6.0 ppm, for 60 and 55 min, respectively. Viral infection assays were performed at room temperature (25 ◦C) and 60–80% RH and the results expressed in PFU/mL. At 6.0 ppm of ozone for 55 min, results showed a significant reduction in the number of plaques (1.0 × 103 PFU/mL) compared to control (2.0 × 106 PFU/mL). Therefore, authors suggest that it is plausible to believe that at slightly higher concentrations and for shorter periods, this gas can be used in particularly critical environments (healthcare setting, hospices, etc.) where a rapid and effective disinfection is required. Table 1 shows the results of ozone virucidal efficacy on some pathogenic viruses including SARS-CoV-2.

3.2. Total Ozone Dose

From the results of these studies, we can extrapolate a relationship between the ozone concentration used and the contact time needed for a viral inactivation >90% (Figure 1).

Gases 2021, 1
Gases 2020, 1, FOR PEER REVIEW

y = − 24.18 ln (x) + 77.10


y = − 24.18 ln (x) + 77.10
where x is the ozone concentration expressed in ppm, with a good correlation (R2 = 0.73, p = 0.0015).

(2) where is the ozone concentration expressed in ppm, with a good correlation (R =0.73,p=0.0015).

The last point of the curve (25 ppm) derives from the experiment of Hudson [52], where contact time was not determined by inactivation but set a priori, and therefore it does not fit into the curve.

However, contact times below 1 min are not technically advisable.

time was not determined by inactivation but set a priori, and therefore it does not fit into the curve.

The choice of a higher concentration and a shorter time or vice versa should be based on the application and specific issues of the location to be disinfected..

However, contact times below 1 min are not technically advisable.

The measurement of the ozone concentration is based on the spectrophotometric technique of

the absorption, by the ozone molecules, of ultraviolet radiation with a wavelength equal to 254 nm.

There are also ozone meters with electrochemical detection principle, both fixed and portable, with extremely affordable costs.

3.3. Ozone Production

Due to its high reactivity, ozone cannot be stored, but it is usually generated in situ.

3.3. Ozone Production

oxygen or water by means of different energy sources. The methods normally used to produce ozone are:

Due to its high reactivity, ozone cannot be stored, but it is usually generated in situ.

– Photochemical method (air, oxygen);

The methods normally used to produce ozone are:

– Dielectric barrier discharge (air, oxygen).

– Electrolysis of water (water);

Electrolysis of water is the preferred technology for ozone water production and, as such, it is

– Photochemical method (air, oxygen);

not useful for air disinfection.

– Dielectric barrier discharge (air, oxygen).

Ultraviolet irradiation of oxygen and nitrogen oxides is the main source of natural ozone, but it is not very practical when high quantities are needed. The ozone production efficiency increases,

Electrolysis of water is the preferred technology for ozone water production and, as such, it is not decreasing the wavelength, with a peak efficiency at 185 nm [19], well below the 254 nm wavelength useful for air disinfection.

used by germicidal lamps.

Ultraviolet irradiation of oxygen and nitrogen oxides is the main source of natural ozone, but it is not very practical when high quantities are needed. The ozone production efficiency increases, decreasing the wavelength, with a peak efficiency at 185 nm [19], well below the 254 nm wavelength used by germicidal lamps.

Inactivation time (min)

Gases 2021, 1 25

Therefore, consumer-oriented UV-ozone “air purifiers” produce, if any, an amount of ozone just above the 0.04 ppm olfactory threshold. However, for applications not requiring high concentrations, as for laboratory standards, UV lamps are an option.

When high yields are required, ozone is generated via the dielectric barrier discharge (DBD), also known as the corona effect. The name derives from the shape of the region of glowing gas formed around an electrode when the electric field strength is high enough for gas ionization, without forming an arc. The feeding gas can be pure oxygen or air, and since the ozone yield is reduced by air humidity, a compressor with the purpose of drying air shall be installed at the inlet. This is one of the most effective technologies for ozone production, and therefore most of the commercial generators are based on DBD.

Ozone production is generally affected by several parameters like the nature of the electrode, the reactor geometry and configuration, the power source used, the gas source and flow rate in reactor, and physical variables like pressure, humidity and temperature. Only DBD generators fed with environmental air will be addressed here. The air that feeds the generator must be purified from possible contaminants like particulate matter, VOC, etc., in order to avoid the generation of reaction by-products that are harmful to human health.

Ozone generators specifications usually provide a production of ozone amount expressed in mg/hour.

The volume of the space to be disinfected should be measured and expressed in cubic meters (m3).

The amount of ozone produced in 1 h, divided by the volume of the room, will provide the concentration of ozone that can be reached in 1 h, or in 1 min if it is divided by 60.

For example, a small commercial ozone generator can produce 2000 mg/hour. For a room of 10 × 10 × 3 m (300 m3) the ozone concentration of 6.6 mg/m3 can be reached after 1 h, which can be converted to 3.36 parts per million (ppm) as follows

ppm = mg/m3 × 24.45/48 (3)

where 24.45 is the volume of 1 mole of an ideal gas at 1 atm and 25◦ C and 48 g/mol the molecular weight of ozone.

Some papers use the product of ozone concentrations for the exposure time in order to compare the efficacy of different conditions, so the unit becomes min.ppm or

The actual ozone yield strongly depends on environmental parameters such as humidity [20], with decreased efficiency at a higher humidity. When the generator is stopped, the interaction of the ozone molecules with the environment, and even among one another, leads to the recombination of ozone into oxygen [21] within a time depending on air flow, temperature and humidity.

Low-cost generators, designed to be manually started and stopped, do not allow for achieving a reliable concentration and holding it for a definite time, if other technical measures are not set up.

3.4. Disposable Masks and Personal Protective Equipment Disinfection for Reuse

A total of 55 documents were retrieved using the mentioned keywords in bibliographic databases, but only 20 were selected for this study.

In times of emergency, disinfection and sterilization protocols, even for disposable PPE (gloves, glasses, face shields, gowns, filtering facepieces respirators), may be needed. A summary of the possible issues for each piece of equipment is reported here.

It is important to keep in mind that reuse should be regulated by a good practice procedure in order to guarantee:

  • –  That disinfection for reuse should not be applied to PPE that are exhausted for another specific use (for example protection from dusts or fibers);
  • –  That an individual PPE would be reused only by the same individual;
  • –  That the acceptable number of reuses has been determined and has not been reached.

Gases 2021, 1 26

Most non-reusable PPEs are made of polymeric materials, which are, by nature, among the cheapest and easiest to work. Ozone contributes strongly to the aging of rubber through the splitting of alkenic double bonds, according to the ozonolysis mechanism described for the first time by Criegge [22]. Ozone, therefore, has a high affinity with unsaturated polymers. To test the resistance of rubber to ozone exposure there are several technical standards, in which the applied ozone concentrations are in the order of a few ppm [23–26].

Jaffe reports that the rate of oxidation at ordinary temperatures is very low, but, depending on the type of rubber compound, the rate increases significantly with each rise of about 10 ◦C [27]. The same author also states that the main factors influencing the action of ozone on rubber are the stress degree, the nature of the rubber compound, the ozone concentration, the exposure period, the speed of contact with the surface and the temperature. The simultaneous action of stress and ozone is a necessary condition for the manifestation of visible cracks [28]. It is also known as the combined effect between ozone and other agents, such as UV [29,30] or chemicals [31], causes a greater and faster oxidation than that obtained from ozone alone.

In conclusion, materials such as natural rubber (latex) and nitrile are the least resistant to ozone. Natural rubber or some synthetic rubbers show cracks if they are just 2–3% stretched and simultaneously exposed to an atmosphere containing 0.01–0.02 ppm of ozone [32]. Instead, butyl rubbers, neopreneandpolyurethane, exposed to the same ozone concentrations, withstand almost triple the amount of stress compared to natural rubbers. Finally, rubbers such as silicone, polyacrylic, chlorosulfonated polyethylene, and ethylene–propylene copolymer, characterized by saturated chemical structures, are the most resistant [27].

Gloves are among the most common and cheapest protective devices. The disposable gloves used in healthcare settings are normally made of nitrile or latex. Considering that the reuse of disposable gloves is rather difficult, it is not considered particularly useful to further investigate any sterilization procedure, even with agents different from ozone.

Potentially infected droplets of liquid and splashes directed towards the eyes can be stopped by goggles or safety glasses or by a shield covering the face down to the chin. Because of its excellent optical and mechanical properties, these PPE are normally composed of polycarbonate, which offers excellent resistance to ozone. Therefore, the use of ozone sterilization procedures could adapt very well to this type of PPE.

Disposable filtering facepieces respirators (FFR) are designed to reduce the inhalation of particulate contaminants (such as droplets or aerosols). The filtering action is carried out by the non-woven fabric, usually polyethylene and/or polypropylene, of which the FFR is made. These materials are normally resistant to the chemical action of ozone. Regarding the sterilization of FFR, Zhang et al. [13] studied the inactivation of SARS-CoV-1 by using different concentrations of ozone and discovered that this virus can be inactivated using a concentration of ozone equal to 27.73 mg/L for 4 min. A recent study [33] showed that exposure to ozone concentrations of 400 ppm for up to 10 cycles of two hours (at room temperature and RH 75–90%) did not degrade the filtration and fit capabilities of the FFR but caused an unclear residual odor that needs further, more detailed, investigation. In another study [11], authors exposed the non-woven polypropylene material used for the N95 FFR at ozone concentrations of 10 and 20 ppm, for a duration of 10, 20 and 60 min. They observed the absence of microscopically visible damage to the fibers; in addition, they performed tests according to the NIOSH standard and also demonstrated the absence of loss of filtration efficiency.

A critical aspect could relate to the retention straps and therefore to the fitting: in fact, in some FFR models, straps can be made of latex and they could lose tensile strength or even break.

In any case, the fact that ozone is a gaseous virucidal makes it a particularly effective method for reaching shadows and crevices and sterilize porous and fibrous materials better than other methods (for example, UV).

Medical gowns can be made of different materials, on which their reusability depends. The reusable gowns are made of cellulose fabrics (like cotton) while the disposable gowns are generally made

Gases 2021, 1 27

of artificial rubber (propylene or polypropylene). The elective disinfection treatment for cotton gowns includes hot water, soap and disinfectants like chlorine [34]. On the other hand, the use of low ozone concentrations (0.02–0.06 ppm) on cotton fibers can increase fluidity and decrease breaking strength [35] as well as a progressive whitening of dyed fabrics [36,37]. The reactions between ozone and dirty, used clothes can lead to the production of harmful volatile organic compounds like aldehydes and acetone [38].

Ozone does not seem to have particular contraindications for sterilizing propylene or polypropylene gowns (like Tyvek©), and it is able to easily reach the internal parts of the folds of the fabric.

3.5. Ozone Negative Impact on Consumer Goods and Other Materials

Ozone, being a strong oxidizing agent, can damage materials such as rubber, plastics, fabrics, paint and metals. Exposure to airborne ozone can progressively damage both the functional and aesthetic qualities of materials and products, shortening their life. This inconvenience can cause significant economic losses for industries and other activities, because of the increased costs of maintenance or of the replacement of the damaged goods [39].

Limited data are available, but they indicate significant damage to rubber products and surface coatings, while textiles and other polymeric materials seem not to be affected in the range of atmospheric concentrations [40]. Ozone is also able to fade dyes on nylon and acetate, and most of the natural dyes and dye-based pigments used by artists. It also plays a role in the process of the corrosion of metals like copper and aluminum [31].

3.6. Occupational Exposure Limits

The U.S.A. Occupational Safety and Health Administration (OSHA) has set Public Health Air Standards of 0.1 ppm for 8 h or 0.3 ppm for 15 min as the limit of the amount of ozone to which people can be safely exposed.

The Directive 2008/50/EC of the European Parliament and of the Council of 21 May 2008, on ambient air quality and cleaner air for Europe, transposed in Italy as Legislative Decree 155/2010, sets two ozone concentration thresholds: an information threshold of 180 μg/m3 per hour, and a long-term objective for the protection of human health of 120 μg/m3 (0.24 ppm), calculated as the daily maximum of the moving average of 8 h.

The olfactory perception threshold of ozone is 0.04 mg/m3, equal to ~ 0.02 ppm, concentrations that have no effect on human health.

A guidance on the safe use of ozone provided by manufacturers and importers of ozone generators is available on the ECHA website [41].

For ozone, no Indicative Occupational Exposure Limit Values (IOELVS) have been set at European Union level, but some Member States have established national occupational exposure limit values, both for long- and for short-term exposures.

In the Italian legislation (attachment XXXVIII of Legislative Decree 81/08) there are no limit values for the occupational exposure to ozone.

Limit values in use in several countries can be found on the German IFA-GESTIS database [42]. Alternatively, the values indicated by the American Conference of Governmental Industrial Hygienist (ACGIH) [43] can be taken into account, which also are related to the physical activity carried out by the workers. Two European countries, Ireland and Spain, have adopted the same ACGIH limit values.

Occupational Exposure Limit Values in different European and extra European countries are reported in Table 2 [44]. Values are very consistent and go from a minimum of 0.05 ppm for long-term to a maximum of 0.3 ppm for short-term exposures.

3.7. Safety Issues

Ozone generators are currently being promoted as effective tools for removing pollution and odours from indoor air, but it must be remembered that ozone is associated not only with adverse health effects but also with safety issues.

Ozone generators are high voltage electric machines, with all the safety implications involved.

Moreover, the corona effect, whichever the frequency of the applied current, produce a broad spectrum of radio frequencies depending on many different parameters [45].

The ECHA safety guidance forbids the entire room where the ozone generator is deployed to pacemaker bearers. The actual extension of the area where the electromagnetic field exceeds the reference levels set for the protection of general public and workers should be addressed in the risk assessment. Depending on the configuration of the generator, this area could range from centimeters to meters; however, a too high radio frequency emission could impair the correct functioning of other devices, including medical equipment.

4. Discussion

Ozone, being a gas, is very effective in reaching all the points in the space and on the surfaces, performing a rapid and extensive disinfection of the environment simply by exploiting its natural air dispersion. The UV-C radiation has effective antimicrobial properties but is well known that there are shady areas where the disinfection could not occur. Liquid disinfectants can be sprinkled as natural air diffusion is limited.

Nevertheless, to date, few studies are available on ozone virucidal activity and these were carried out using very different experimental conditions on some pathogenic viruses or their surrogates. Since standardised methods for the assessment of ozone virucidal efficacy are not available, the heterogeneity of experimental procedures performed makes it difficult to compare the results. In the studies examined, the experiments were carried out using various ozone generators, under different conditions of temperature and relative humidity, on different viruses. By extrapolating data on ozone virucidal activity at room temperature and medium relative humidity between 35 and 55%, we found that an opportune combination of ozone concentration, in the range 1–25 ppm, and contact times between 10 min and 3 h are able to efficiently inactivate (>90%) some pathogenic viruses or their surrogates. A mathematical relationship between ozone concentration and the needed contact time is reported.

In these studies, some authors showed that a parameter that plays an important role is the relative humidity that increases ozone virucidal activity. Among these, very recently, Yano et al. [22] reported the first in vitro inactivation study on SARS-CoV-2 virus by 6.0 ppm ozone at room temperature and 60–80% RH, obtaining, in only 55 min, a 99.9% reduction (which equates to about 3-Log) in the number of the PFU/mL

Overall, findings suggest that ozone used at a low concentration is a powerful disinfectant (up to 99% reduction) when combined with a high RH because, when air humidity is higher, more free radicals will be formed, which are able to kill airborne viruses.

There is no harmonized classification of ozone. According to the classification provided by companies to ECHA, ozone should be classified for acute inhalation toxicity (Acute Tox. 1), skin corrosion (Skin Corr. 1B), serious eye damage (Eye Damage 1) and specific target organ (airways) repeated toxicity (STOT Rep. Exp. 1). As reported by the ECHA Registry of classification and labelling (CLH) Intentions, a proposal to classify ozone also for mutagenicity (Muta. 2) and carcinogenicity (Carc. 2) was submitted by Germany in 2016.

Due to its toxicological properties and its capability to degrade several materials, the optimal use of ozone for the disinfection of air and surfaces is in the absence of humans, using a dose and time of usage sufficient to destroy viruses, but having minimal degradation effects on materials.

Gases 2021, 1 30

If it is not possible to demonstrate that, after the disinfection of a workplace, airborne ozone concentrations guaranteeing the safety of the workers have been reached, it is necessary to determine said concentrations with an appropriate method.

The use of ozone as a disinfectant for the re-use of PPE has been further investigated in the light of COVID-19 pandemic as possible solution to the shortage of personal protective equipment. On the basis of the available information, the use of ozone disinfection procedures could adapt very well to goggles, safety glasses and face shields, propylene or polypropylene gowns, while for disposable filtering facepieces’ respirators, further detailed investigations are needed.

The Italian Institute for Public Health (ISS) [44] concludes that this gas must be used in unoccupied and confined environments, and that it is necessary to evaluate the risk of exposure of both operators (who must be trained and equipped with suitable personal protective equipment) and of the staff who will use the disinfected premises.

5. Conclusions

The examination of the literature on ozone virucidal activity showed that ozone, used at a low concentration, is a powerful agent (up to 99% reduction) when combined with a high RH, for the disinfection of air, surfaces and some personal protection devices. The optimal minimal dose and the needed contact time can be calculated in order to sufficiently to destroy viruses, but this combination should be tested for possible degradation effects on materials and goods.

The major drawbacks for the use of ozone as a disinfectant are the risks that it poses to human health and safety: it is able to induce decreases in lung function and inflammation, and is associated with respiratory effects, including asthma and chronic obstructive pulmonary disease exacerbations. Moreover, ozone generators are high-voltage electric machines, with all the safety implications involved. If other, less harmful, disinfectants are not applicable, ozone is a valid option, provided that people/workers are never present during the treatment.

Author Contributions: Conceptualization, E.G., G.T., R.S. and F.F.; investigation, E.G., G.T., A.M., R.C., P.C., A.T., R.S., M.S., G.F., F.F. and G.T.; data curation, G.T. and R.S.; writing—original draft preparation, E.G., G.T., A.M., R.C., P.C., A.T., R.S., M.S., G.F., F.F. and G.T.; writing—review and editing, E.G. and G.T. All authors have read and agreed to the published version of the manuscript.

Funding: This research received no external funding.
Conflicts of Interest: The authors declare no conflict of interest.


  1. ISS Working Group on Biocides. Interim recommendations on cleaning and disinfection of non-healthcare settings during COVID-19 health emergency: Surfaces, indoor environments and clothing. In Rapporto ISS COVID-19 n. 25/2020; ISS: Rome, Italy, 2020.
  2. Knobler, S.; Mahmoud, A.; Lemon, S.; Mack, A.; Sivitz, L.; Oberholtzer, K. Learning from SARS: Preparing for the Next Disease Outbreak; National Academies Press: Washington, DC, USA, 2004. [CrossRef]
  3. Wolf, C.; Von Gunten, U.; Kohn, T. Kinetics of Inactivation of Waterborne Enteric Viruses by Ozone. Environ. Sci. Technol. 2018, 52, 2170–2177. [CrossRef] [PubMed]
  4. Roy, D.; Wong, P.K.Y.; Engelbrecht, R.S.; Chian, E.S.K. Mechanism of enteroviral inactivation by ozone. Appl. Environ. Microbiol. 1981, 41, 718–723. [CrossRef] [PubMed]
  5. Hudson, J.B.; Sharma, M.; Vimalanathan, S. Development of a practical method for using ozone gas as a virus decontaminating agent. Ozone Sci. Eng. 2009, 31, 216–223. [CrossRef]
  6. Tanaka, H.; Sakurai, M.; Ishii, K.; Matsuzawa, Y. Inactivation of Influenza virus by ozone gas. IHI Eng. Rev. 2009, 42, 108–111.
  7. Petry, G.; Rossato, L.G.; Nespolo, J.; Kreutz, L.C.; Bertol, C.D. In Vitro Inactivation of Herpes Virus by Ozone. Ozone Sci. Eng. 2014, 36, 249–252. [CrossRef]
  8. Tseng, C.C.; Li, C.S. Ozone for inactivation of aerosolized bacteriophages. Aerosol Sci. Technol. 2006, 40, 683–689. [CrossRef]

Gases 2021, 1 31

  1. Environmental Protection Agency (EPA). U.S. EPA Integrated Science Assessment (ISA) for Ozone and Related Photochemical Oxidants (Final Report); U.S. Environmental Protection Agency: Washington, DC, USA, 2020.
  2. Dubuis, M.E.; Dumont-Leblond, N.; Laliberté, C.; Veillette, M.; Turgeon, N.; Jean, J.; Duchaine, C. Ozone efficacy for the control of airborne viruses: Bacteriophage and norovirus models. PLoS ONE 2020, 15, e0231164. [CrossRef]
  3. Dennis, R.; Cashion, A.; Emanuel, S.; Hubbard, D. Ozone Gas: Scientific Justification and Practical Guidelines for Improvised Disinfection using Consumer-Grade Ozone Generators and Plastic Storage Boxes. J. Sci. Med. 2020, 2. [CrossRef]
  4. Tseng, C.; Li, C. Inactivation of surface viruses by gaseous ozone. J. Environ. Health 2008, 70, 56–63.
  5. Zhang, J.; Zheng, C.; Xiao, G.; Zhou, Y.; Gao, R. Examination of the Efficacy of Ozone Solution Disinfectant in in Activating Sars Virus. Chin. J. Disinfect. 2004, 1, 32–33.
  6. Li, C.S.; Wang, Y.C. Surface germicidal effects of ozone for microorganisms. Am. Ind. Hyg. Assoc. J. 2003, 64, 533–537. [CrossRef]
  7. Sharma, M.; Hudson, J.B. Ozone gas is an effective and practical antibacterial agent. Am. J. Infect. Control 2008, 36, 559–563. [CrossRef] [PubMed]
  8. Foarde, K.K.; Vanosdell, D.W.; Steiber, R.S. Investigation of gas-phase ozone as a potential biocide. Appl. Occup. Environ. Hyg. 1997, 12, 535–542. [CrossRef]
  9. Blanchard, E.L.; Lawrence, J.D.; Noble, J.A.; Xu, M.; Joo, T.; Ng, N.L.; Schmidt, B.E.B.; Santangelo, P.J.; Finn, M.G. Enveloped Virus Inactivation on Personal Protective Equipment by Exposure to Ozone. MedRxiv 2020. [CrossRef]
  10. Yano, H.; Nakanoa, R.; Suzukia, Y.; Nakanoa, A.; Kasaharab, K.; Hoso, H. Inactivation of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by gaseous ozone treatment. J. Hosp. Infect. 2020, 106, 837–838. [CrossRef] [PubMed]
  11. Al-Shamma’a, A.I.; Pandithas, I.; Lucas, J. Low-pressure microwave plasma ultraviolet lamp for water purification and ozone applications. J. Phys. D. Appl. Phys. 2001, 34, 2775. [CrossRef]
  12. Zhang, X.; Lee, B.J.; Im, H.G.; Cha, M.S. Ozone Production with Dielectric Barrier Discharge: Effects of Power Source and Humidity. IEEE Trans. Plasma Sci. 2016, 44, 2288–2296. [CrossRef]
  13. McClurkin, J.D.; Maier, D.E.; Ileleji, K.E. Half-life time of ozone as a function of air movement and conditions in a sealed container. J. Stored Prod. Res. 2013, 55, 41–47. [CrossRef]
  14. Criegee, R. Mechanism of Ozonolysis. Angew. Chemie Int. Ed. English 1975. [CrossRef]
  15. International Organization for Standardization (ISO). Rubber, Vulcanized or Thermoplastic—Resistance to Ozone Cracking Part 1: Static Strain Test (ISO 1431-1); ISO: Geneva, Switzerland, 1989.
  16. International Organization for Standardization (ISO). Rubber, Vulcanized or Thermoplastic—Resistance to Ozone Cracking—Part 2: Dynamic Strain Test (ISO 1431-2); ISO: Geneva, Switzerland, 1994.
  17. International Organization for Standardization (ISO). Rubber, Vulcanized or Thermoplastic—Resistance to Ozone Cracking—Part 3: Reference and Alternative Methods for Determining the Ozone Concentration in Laboratory Test Chambers (ISO 1431-3); ISO: Geneva, Switzerland, 2000.
  18. International Organization for Standardization (ISO). Rubber—Or Plastics-Coated Fabrics—Determination of Resistance to Ozone Cracking under Static Conditions (ISO 3011); ISO: Geneva, Switzerland, 1997.
  19. Jaffe, L.S. The effects of photochemical oxidants on materials. J. Air Pollut. Control Assoc. 1967, 17, 375–378. [CrossRef]
  20. Van Rossem, A.; Talen, H.W. The Appearance of Atmospheric Cracks in Stretched Rubber. Rubber Chem. Technol. 1931, 4, 490–504. [CrossRef]
  21. Peeling, J.; Clark, D.T. Surface Ozonation And Photooxidation Of Polyethylene Film. J. Polym. Sci. A1 1983, 21, 2047–2055. [CrossRef]
  22. Walzak, M.J.; Flynn, S.; Foerch, R.; Hill, J.M.; Karbashewski, E.; Lin, A.; Strobel, M. UV and ozone treatment of polypropylene and poly(Ethylene terephthalate). J. Adhes. Sci. Technol. 1995, 9, 1229–1248. [CrossRef]
  23. James, R.D. Ozone: The Intractable Problem; Western Association for Art Conservation (WAAC) Newsletter: Alaska, HI, USA, 1985.
  24. Crabtree, J.; Malm, F. Deterioration of Rubber from Use and with Age. In Engineering Uses of Rubber; Reinhold Publishing Corp: New York, NY, USA, 1956.
  25. Manning, E.P.; Stephens, M.D.; Patel, S.; Dufresne, S.; Silver, B.; Gerbarg, P.; Gerbarg, Z.; Cruz, C.D.; Sharma, L.

Disinfection of N95 Respirators with Ozone. MedRxiv 2020. [CrossRef]

Gases 2021, 1 32

  1. World Health Organization (WHO). Rational Use of Personal Protective Equipment for Coronavirus Disease (COVID-19) and Considerations during Severe Shortages Interim Guidance; World Health Organization: Geneva, Switzerland, 2020.
  2. Bogaty, H.; Campbell, K.S.; Appel, W.D. The Oxidation of Cellulose by Ozone in Small Concentrations. Text. Res. J. 1952, 22, 81–83. [CrossRef]
  3. Prabaharan, M.; Rao, J.V. Study on ozone bleaching of cotton fabric-process optimisation, dyeing and finishing properties. Color. Technol. 2001, 117, 92–103. [CrossRef]
  4. Perincek, S.D.; Duran, K.; Korlu, A.E.; Bahtiyari, I.M. An investigation in the use of ozone gas in the bleaching of cotton fabrics. Ozone Sci. Eng. 2007, 29, 325–333. [CrossRef]
  5. Rai, A.C.; Guo, B.; Lin, C.H.; Zhang, J.; Pei, J.; Chen, Q. Ozone reaction with clothing and its initiated VOC emissions in an environmental chamber. Indoor Air 2014, 24, 49–58. [CrossRef]
  6. California Environmental Protection Agency. Available online: 2017-10/ozone-fs.pdf (accessed on 20 November 2020).
  7. Lee, D.S.; Holland, M.R.; Falla, N. The potential impact of ozone on materials in the U.K. Atmos. Environ. 1996, 30, 1053–1065. [CrossRef]
  8. European Chemicals Agency (ECHA) Helsinki, Finland. Ozone—Substance Infocard. Available online: (accessd on 22 November 2020).
  9. Institut fur Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung (IFA). Database GESTIS. Availableonline:
  10. ACGIH. 2020 TLVs and BEIs; ACGIH: Cincinnati, OH, Canada, 2020.
  11. Working Group ISS-INAIL. Focus on professional use of ozone also in reference to COVID-19. In Rapporto ISS COVID-19 n. 25/2020; ISS: Rome, Italy, 2020; p. 42.
  12. Moongilan, D. Corona and arcing in power and RF devices. In Proceedings of the 2009 IEEE Symposium on Product Compliance Engineering, Toronto, ON, Canada, 26–28 October 2009; pp. 1–7.

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Get a downloadable copy of this publication here

Posted on

Ozone, The Strongest Disinfectant On The Planet What is it and How Does It Work

ozone generators

Ozone is a molecule that is made up of three oxygen atoms.

ozone generators

This molecule is a powerful oxidiser with many industrial and consumer applications.

After a thunderstorm, the fresh, clean smell in the air is from ozone produced by lightning. Photocopiers also produce ozone and this is the smell that you get when you have been doing a long run of photocopying.

Ozone sanitises, deodorises and disinfects.

When pollutants like bad smells, bacteria or viruses come in contact with ozone, they are destroyed by oxidation.

Ozone has a lot of application for both residential and industrial uses.

Ozone cannot be stored like other gases because of its half-life properties. It begins to decompose the moment it is produced and this is why it needs to produced on demand in situ by an ozone generator.

Ozone as a Deodoriser

Ozone generators producing very low levels of ozone have been sold as air fresheners, air purifiers and deodorisers in hotel toilets and wash rooms for many years.

Few people are aware of how it does it actually works. They just know it does. What they don’t know is that It works by attacking and killing the bacteria that causes the smells by oxidisation. Ozone can kill bacteria, pathogens and viruses on impact. So, whilst they have been used to remove smells and odours it has in fact also been sanitising and disinfecting these small areas.

Now, with the coronavirus causing havoc around the globe the deodorising effect has become of secondary importance to the fact that it will keep areas free from these harmful viruses and bacteria.

Not only are they used in bathrooms and toilets, they also remove smells from carpets, soft furnishings and clothes. Ozone can be used to kill mould spores and remove the smell of damp after a flood underneath floorboards or in a basement as well as eliminating the odour from smoke damaged rooms after a fire.

Ozone reaches parts other cleaners cannot.

As ozone is a gas that is heavier than air, it can reach areas that other traditional cleaning methods cannot like under floorboards, behind cupboards in the loft space or other restricted spaces and other hard to reach areas. They can be used to remove smells from the car of heavy smoker or one that has had milk , vomit or other nasties spilt underneath the seats or in the boot.

Ozone Used For Water Treatment

Ozone is used extensively in water treatment plants to improving water quality.

It is much more effective than chlorine, less expensive and because ozone is basically oxygen molecules is non toxic and better for the environment than chlorine or other chemicals which have been linked to cancer.

Food preservation

Ozone kills microbes and prevents mould spores growing which helps prolong the shelf life of fresh food.

Unlike using chemicals ozone leaves no chemical residue, does not produce any harmful by priducts and leaves no aftertaste.

By washing fruit and vegetable in ozonised water or subjecting meat to an ozone filled environment will slow down the ageing process and keep the food fresher for longer reducing water through spoilage.

For more details on how ozone can help protect your staff and customers contact us. We will be ahppy to answer any questions or queries that you have and advise you on the best system for your situation.

Posted on 1 Comment

What is Ozone

What is ozone?

Ois ozone, i.e. gaseous oxygen with an extra oxygen atom loosely bound to the oxygen molecule. Ozone is a strong oxidising compound which rapidly oxidises organic materials, iron, manganese and other substances when it is added to drinking water. In addition, it is an extremely effective disinfectant against bacteria and viruses.

O is the chemical symbol for an oxygen atom.

O2 is the chemical symbol for a molecule of oxygen, i.e. two oxygen atoms firmly bonded together. This is the gas which we humans and animals breathe. The air we breathe consists of about 20% oxygen and about 79% nitrogen, the rest being carbon dioxide and several inert gases such as argon and neon.

O3 is ozone, i.e. gaseous oxygen with an extra oxygen atom loosely bound to the oxygen molecule. Ozone is a strong oxidising compound which rapidly oxidises organic materials, iron, manganese and other substances when it is added to drinking water. In addition, it is an extremely effective disinfectant against bacteria and viruses.

Ozone is a light bluish gas with a marked pungent smell even in very low concentrations.

Ozone is very unstable and therefore has a short life. The gas decomposes within 30-40 minutes and forms oxygen, i.e. the completely safe gas we ourselves breathe.

The quantity of ozone normally added to drinking water in the treatment stage is very small, 0,5-5 g per 1 000 litres.

In addition to its extremely good disinfectant properties, ozone also improves the smell and taste of drinking water and has a bleaching effect on discoloured water. Chlorine in the various forms in which it is added to drinking water as a disinfecting agent can, in certain cases, impair taste and smell and, in isolated cases, give rise to carcinogenic by-products: these aspects can be totally avoided by using ozone.

Ozone kills bacteria about 3 200 times faster than chlorine.

Ozone is produced by electrical discharge e.g. when there is a thunderstorm with lightening or through spark formation e.g. in electrical welding. Strong UV radiation also produces ozone.

The use of ozone in drinking water in Sweden has until recently not been routine. However, there is currently a marked trend towards an increased use of ozone and an understanding of its many advantages.

The use of ozone in Europe and the USA is much wider than in Sweden. Perhaps this is because, compared with large parts of the rest of the world, we have such large reserves of good quality raw water for drinking water use.

Think of the ozone layer which surrounds our earth and which is talked about so often as a protective UV filter against the strong rays of the sun. Without this, the environment in which we live would be threatened!